BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Cranes101 - ECPv6.16.3//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://cranes101.com
X-WR-CALDESC:Events for Cranes101
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250321T080000
DTEND;TZID=America/New_York:20250321T160000
DTSTAMP:20260531T103605
CREATED:20250307T201324Z
LAST-MODIFIED:20250307T201324Z
UID:10000198-1742544000-1742572800@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Operator Evaluations - Town of Holbrook - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/march21-bucket-truck-operator-safety-training-with-operator-evaluations-town-of-holbrook-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250321T080000
DTEND;TZID=America/New_York:20250321T160000
DTSTAMP:20260531T103605
CREATED:20250307T201324Z
LAST-MODIFIED:20250307T201324Z
UID:10000079-1742544000-1742572800@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Operator Evaluations - Town of Holbrook - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/march21-bucket-truck-operator-safety-training-with-operator-evaluations-town-of-holbrook-closed/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250322T080000
DTEND;TZID=America/New_York:20250322T160000
DTSTAMP:20260531T103605
CREATED:20250307T152119Z
LAST-MODIFIED:20250307T152119Z
UID:10000178-1742630400-1742659200@cranes101.com
SUMMARY:Signalperson with Basic Rigger - CWhite Marine - Danvers - CLOSED
DESCRIPTION:This live signalperson/basic rigger certification course covers: \n\nRigging component identification\nMathematical calculations\nSling selection\nRigging inspection\nWire rope and chain design\nProper rigging techniques\nProper use of the ANSI hand signals\nCrane limitations\nCrane characteristics and dynamics\nSignalperson requirements per OSHA 1926.1419-1926.1422\nWorking near power lines\nVoice signals \nPractical Exam for each student on signals\, ropes and slings per customer request and customized to their application\n\nThis training meets the requirements mandated in OSHA 1926.1419 through \n1926.1422 and 1926.1428\, and ANSI/ASME B30 standards. \nFor more information as to the content of this class\, please view the descriptions here. \nTraining Length: \n\n6 to 8 hour course\n\nParticipants will receive a card certifying that they have successfully completed this training that they should carry on the job-site. \nUse this form below to request more information about our signalperson/rigger course. One of our staff will be in contact with you soon. 
URL:https://cranes101.com/event/march22-signalperson-with-basic-rigger-2/
LOCATION:MA
CATEGORIES:Construction Courses,Industrial Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250322T080000
DTEND;TZID=America/New_York:20250322T160000
DTSTAMP:20260531T103605
CREATED:20250307T152119Z
LAST-MODIFIED:20250307T152119Z
UID:10000059-1742630400-1742659200@cranes101.com
SUMMARY:Signalperson with Basic Rigger - CWhite Marine - Danvers - CLOSED
DESCRIPTION:This live signalperson/basic rigger certification course covers: \n\nRigging component identification\nMathematical calculations\nSling selection\nRigging inspection\nWire rope and chain design\nProper rigging techniques\nProper use of the ANSI hand signals\nCrane limitations\nCrane characteristics and dynamics\nSignalperson requirements per OSHA 1926.1419-1926.1422\nWorking near power lines\nVoice signals \nPractical Exam for each student on signals\, ropes and slings per customer request and customized to their application\n\nThis training meets the requirements mandated in OSHA 1926.1419 through \n1926.1422 and 1926.1428\, and ANSI/ASME B30 standards. \nFor more information as to the content of this class\, please view the descriptions here. \nTraining Length: \n\n6 to 8 hour course\n\nParticipants will receive a card certifying that they have successfully completed this training that they should carry on the job-site. \nUse this form below to request more information about our signalperson/rigger course. One of our staff will be in contact with you soon. 
URL:https://cranes101.com/event/march22-signalperson-with-basic-rigger/
LOCATION:MA
CATEGORIES:Construction Courses,Industrial Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250325T080000
DTEND;TZID=America/New_York:20250325T160000
DTSTAMP:20260531T103605
CREATED:20250312T190349Z
LAST-MODIFIED:20250312T190349Z
UID:10000214-1742889600-1742918400@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Evaluations - MIIA - Town of Leominster - CLOSED
DESCRIPTION:We provide bucket truck training online and in person\, to help you get the required operator qualifications.\n  \nThis bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon. \n \n 
URL:https://cranes101.com/event/march25-bucket-truck-operator-safety-training-with-evaluations-miia-town-of-leominster-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250325T080000
DTEND;TZID=America/New_York:20250325T160000
DTSTAMP:20260531T103605
CREATED:20250312T190349Z
LAST-MODIFIED:20250312T190349Z
UID:10000095-1742889600-1742918400@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Evaluations - MIIA - Town of Leominster - CLOSED
DESCRIPTION:We provide bucket truck training online and in person\, to help you get the required operator qualifications.\n  \nThis bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon. \n \n 
URL:https://cranes101.com/event/march25-bucket-truck-operator-safety-training-with-evaluations-miia-town-of-leominster-closed/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250326T080000
DTEND;TZID=America/New_York:20250326T130000
DTSTAMP:20260531T103605
CREATED:20250312T192206Z
LAST-MODIFIED:20250312T192206Z
UID:10000218-1742976000-1742994000@cranes101.com
SUMMARY:Fall Protection - Bomco - Gloucester\, MA - CLOSED
DESCRIPTION:Material covered in this course: \n\nProper body harness donning instructions\nDaily inspections of body harnesses\nANSI and OSHA standards\nProper care and maintenance\nFall protection\nSuspension trauma\nBasic emergency procedures\n\nThis fall protection safety training and certification is compliant with the OSHA standards 1910.140 – Personal fall protection systems\, 1910.502 – Fall protection systems criteria and practices\, and ANSI/ASSE Z359.11 – Safety Requirements for Full Body Harnesses. \n  \nUse this form below to request more information. One of our staff will be in contact with you soon. \n \n 
URL:https://cranes101.com/event/march26-fall-protection-2/
LOCATION:MA
CATEGORIES:Construction Courses,Industrial Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250326T080000
DTEND;TZID=America/New_York:20250326T130000
DTSTAMP:20260531T103605
CREATED:20250312T192206Z
LAST-MODIFIED:20250312T192206Z
UID:10000099-1742976000-1742994000@cranes101.com
SUMMARY:Fall Protection - Bomco - Gloucester\, MA - CLOSED
DESCRIPTION:Material covered in this course: \n\nProper body harness donning instructions\nDaily inspections of body harnesses\nANSI and OSHA standards\nProper care and maintenance\nFall protection\nSuspension trauma\nBasic emergency procedures\n\nThis fall protection safety training and certification is compliant with the OSHA standards 1910.140 – Personal fall protection systems\, 1910.502 – Fall protection systems criteria and practices\, and ANSI/ASSE Z359.11 – Safety Requirements for Full Body Harnesses. \n  \nUse this form below to request more information. One of our staff will be in contact with you soon. \n \n 
URL:https://cranes101.com/event/march26-fall-protection/
LOCATION:MA
CATEGORIES:Construction Courses,Industrial Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250402T080000
DTEND;TZID=America/New_York:20250403T160000
DTSTAMP:20260531T103605
CREATED:20250307T200939Z
LAST-MODIFIED:20250307T200939Z
UID:10000077-1743580800-1743696000@cranes101.com
SUMMARY:Overhead Crane Operator Safety Course with Evaluations and Custom Rigging - Great River Hydro - CLOSED
DESCRIPTION:  \nThis overhead crane operator safety training course covers operation\, inspection\, rigging\, owners’ responsibility and operators’ responsibility. It includes hands on operator evaluations as well. \nThis training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8)\, ASME B30.16\, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) \nA completion of safety training certificate is awarded by Cranes 101.  Operators who successfully pass the hands on qualification receive a Qualified Operator certificate as well as a wallet card \n  \nFor more information as to the content of this class\, please view the description here. \nTraining Length:  \n\n3 to 4 Hours for the course; additional time needed if operator qualification to be included\n\nUse this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/april2-april3-overhead-crane-operator-safety-course-with-evaluations-and-custom-rigging/
LOCATION:MA
CATEGORIES:Construction Courses,Industrial Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250402T080000
DTEND;TZID=America/New_York:20250403T160000
DTSTAMP:20260531T103605
CREATED:20250307T200939Z
LAST-MODIFIED:20250307T200939Z
UID:10000196-1743580800-1743696000@cranes101.com
SUMMARY:Overhead Crane Operator Safety Course with Evaluations and Custom Rigging - Great River Hydro - CLOSED
DESCRIPTION:  \nThis overhead crane operator safety training course covers operation\, inspection\, rigging\, owners’ responsibility and operators’ responsibility. It includes hands on operator evaluations as well. \nThis training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8)\, ASME B30.16\, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) \nA completion of safety training certificate is awarded by Cranes 101.  Operators who successfully pass the hands on qualification receive a Qualified Operator certificate as well as a wallet card \n  \nFor more information as to the content of this class\, please view the description here. \nTraining Length:  \n\n3 to 4 Hours for the course; additional time needed if operator qualification to be included\n\nUse this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/april2-april3-overhead-crane-operator-safety-course-with-evaluations-and-custom-rigging-2/
LOCATION:MA
CATEGORIES:Construction Courses,Industrial Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250408T080000
DTEND;TZID=America/New_York:20250408T160000
DTSTAMP:20260531T103606
CREATED:20250307T163012Z
LAST-MODIFIED:20250307T163012Z
UID:10000064-1744099200-1744128000@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - MASS DOT - Sterling MA  - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n  \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/april8-bucket-truck-operator-safety-training-with-qualifications-mass-dot-sterling-ma-closed/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250408T080000
DTEND;TZID=America/New_York:20250408T160000
DTSTAMP:20260531T103606
CREATED:20250307T163012Z
LAST-MODIFIED:20250307T163012Z
UID:10000183-1744099200-1744128000@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - MASS DOT - Sterling MA  - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n  \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/april8-bucket-truck-operator-safety-training-with-qualifications-mass-dot-sterling-ma-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250408T083000
DTEND;TZID=America/New_York:20250408T140000
DTSTAMP:20260531T103606
CREATED:20250403T121107Z
LAST-MODIFIED:20250403T121107Z
UID:10000113-1744101000-1744120800@cranes101.com
SUMMARY:Signalperson with Basic Rigging - Eversource - Westwood MA - CLOSED
DESCRIPTION:  \nThis live signalperson/basic rigger certification course covers: \n\nRigging component identification\nMathematical calculations\nSling selection\nRigging inspection\nWire rope and chain design\nProper rigging techniques\n\nProper use of the ANSI hand signals\nCrane limitations\nCrane characteristics and dynamics\nSignalperson requirements per OSHA 1926.1419-1926.1422\nWorking near power lines\nVoice signals \n\nThis training meets the requirements mandated in OSHA 1926.1419 through \n1926.1422 and 1926.1428\, and ANSI/ASME B30 standards. \nFor more information as to the content of this class\, please view the descriptions here. \nTraining Length: \n\n4 to 6 hour course\n\nParticipants will receive a card certifying that they have successfully completed this training that they should carry on the job-site. \nUse this form below to request more information about our signalperson/rigger course. One of our staff will be in contact with you soon. 
URL:https://cranes101.com/event/april8-signalperson-with-basic-rigging-eversource-westwood-ma-closed/
LOCATION:MA
CATEGORIES:Construction Courses,Industrial Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250408T083000
DTEND;TZID=America/New_York:20250408T140000
DTSTAMP:20260531T103606
CREATED:20250403T121107Z
LAST-MODIFIED:20250403T121107Z
UID:10000222-1744101000-1744120800@cranes101.com
SUMMARY:Signalperson with Basic Rigging - Eversource - Westwood MA - CLOSED
DESCRIPTION:  \nThis live signalperson/basic rigger certification course covers: \n\nRigging component identification\nMathematical calculations\nSling selection\nRigging inspection\nWire rope and chain design\nProper rigging techniques\n\nProper use of the ANSI hand signals\nCrane limitations\nCrane characteristics and dynamics\nSignalperson requirements per OSHA 1926.1419-1926.1422\nWorking near power lines\nVoice signals \n\nThis training meets the requirements mandated in OSHA 1926.1419 through \n1926.1422 and 1926.1428\, and ANSI/ASME B30 standards. \nFor more information as to the content of this class\, please view the descriptions here. \nTraining Length: \n\n4 to 6 hour course\n\nParticipants will receive a card certifying that they have successfully completed this training that they should carry on the job-site. \nUse this form below to request more information about our signalperson/rigger course. One of our staff will be in contact with you soon. 
URL:https://cranes101.com/event/april8-signalperson-with-basic-rigging-eversource-westwood-ma-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses,Industrial Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250409T080000
DTEND;TZID=America/New_York:20250409T160000
DTSTAMP:20260531T103606
CREATED:20250307T163431Z
LAST-MODIFIED:20250307T163431Z
UID:10000065-1744185600-1744214400@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - MASS DOT - Taunton MA  - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n  \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/april9-bucket-truck-operator-safety-training-with-qualifications-mass-dot-taunton-ma-closed/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250409T080000
DTEND;TZID=America/New_York:20250409T160000
DTSTAMP:20260531T103606
CREATED:20250307T163431Z
LAST-MODIFIED:20250307T163431Z
UID:10000184-1744185600-1744214400@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - MASS DOT - Taunton MA  - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n  \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/april9-bucket-truck-operator-safety-training-with-qualifications-mass-dot-taunton-ma-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250411T070000
DTEND;TZID=America/New_York:20250411T150000
DTSTAMP:20260531T103606
CREATED:20250312T190659Z
LAST-MODIFIED:20250312T190659Z
UID:10000215-1744354800-1744383600@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - Town of Wakefield MA - CLOSED
DESCRIPTION:We provide bucket truck training online and in person\, to help you get the required operator qualifications.\n  \nThis bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/april11-bucket-truck-operator-safety-training-with-qualifications-town-of-wakefield-ma-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250411T070000
DTEND;TZID=America/New_York:20250411T150000
DTSTAMP:20260531T103606
CREATED:20250312T191108Z
LAST-MODIFIED:20250312T191108Z
UID:10000216-1744354800-1744383600@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Evaluations - Town of Holliston - CLOSED
DESCRIPTION:We provide bucket truck training online and in person\, to help you get the required operator qualifications.\n  \nThis bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/april11-bucket-truck-operator-safety-training-with-evaluations-town-of-holliston-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250415T073000
DTEND;TZID=America/New_York:20250415T153000
DTSTAMP:20260531T103606
CREATED:20250307T163909Z
LAST-MODIFIED:20250307T163909Z
UID:10000185-1744702200-1744731000@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - MASS DOT - Lenox MA - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n  \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/april15-bucket-truck-operator-safety-training-with-qualifications-mass-dot-lenox-ma-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250416T080000
DTEND;TZID=America/New_York:20250416T160000
DTSTAMP:20260531T103606
CREATED:20250307T165642Z
LAST-MODIFIED:20250307T165642Z
UID:10000187-1744790400-1744819200@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - NHDOT - Hampton NH - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n  \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/april16-bucket-truck-operator-safety-training-with-qualifications-nhdot-hampton-nh-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250417T073000
DTEND;TZID=America/New_York:20250417T153000
DTSTAMP:20260531T103606
CREATED:20250307T164102Z
LAST-MODIFIED:20250307T164102Z
UID:10000186-1744875000-1744903800@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - MA DOT - Arlington\, MA - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n  \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/bucket-truck-operator-safety-training-with-qualifications-ma-dot-arlington-ma-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250430T080000
DTEND;TZID=America/New_York:20250430T160000
DTSTAMP:20260531T103606
CREATED:20250307T175227Z
LAST-MODIFIED:20250307T175227Z
UID:10000188-1746000000-1746028800@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - NH DOT - Bedford NH - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n  \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/april30-bucket-truck-operator-safety-training-with-qualifications-nh-dot-bedford-nh-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250513T073000
DTEND;TZID=America/New_York:20250513T153000
DTSTAMP:20260531T103606
CREATED:20250307T203845Z
LAST-MODIFIED:20250307T203845Z
UID:10000210-1747121400-1747150200@cranes101.com
SUMMARY:Bucket Truck Safety Training with Operator Evaluations - MA DOT - Northampton MA - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n  \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/may13-bucket-truck-safety-training-with-operator-evaluations-ma-dot-northampton-ma-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250515T080000
DTEND;TZID=America/New_York:20250515T160000
DTSTAMP:20260531T103606
CREATED:20250307T181327Z
LAST-MODIFIED:20250307T181327Z
UID:10000189-1747296000-1747324800@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - NH DOT - Hooksett - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n  \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
URL:https://cranes101.com/event/may15-bucket-truck-operator-safety-training-with-qualifications-nh-dot-hooksett-closed-2/
LOCATION:MA
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250610T080000
DTEND;TZID=America/New_York:20250610T160000
DTSTAMP:20260531T103606
CREATED:20250521T195547Z
LAST-MODIFIED:20250602T165324Z
UID:10000231-1749542400-1749571200@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training - OPEN REGISTRATION* - Bellingham MA - BYOBT - call 508-966-4100
DESCRIPTION:*this class will only be held with a minimum attendance registered \nBYOBT – Bring your own Bucket Truck to Bellingham!   Our instructor will provide your safety training and then your evaluation on YOUR truck!  Space is limited to 14 attendees with a minimum of 6 required to hold the class.  Special discounted pricing of just $405 for safety training course PLUS evaluation. (regular pricing is $455) \nThis bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \n \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon. \nPlease enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some\, but not all\, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal\, daily inspections\, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course\, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links\, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes :  please submit this form first\, and then call 1-866-788-7600It's after hours or I can't chat right now\, so I'll just hit submit and wait to hear back from you.		\n			other do other\n			\n		\n		Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed\, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal\, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes\, please do contact me.Submit
URL:https://cranes101.com/event/june10-bucket-truck-operator-safety-training-open-registration-bellingham-ma-byot/
LOCATION:Bellingham\, MA\, Bellingham\, MA\, United States
CATEGORIES:Construction Courses
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250718T080000
DTEND;TZID=America/New_York:20250718T130000
DTSTAMP:20260531T103606
CREATED:20250715T192117Z
LAST-MODIFIED:20250715T192144Z
UID:10000264-1752825600-1752843600@cranes101.com
SUMMARY:Signalperson with Basic Rigging - Century Drywall - PRIVATE
DESCRIPTION:This live signalperson/basic rigger certification course covers: \n\nRigging component identification\nMathematical calculations\nSling selection\nRigging inspection\nWire rope and chain design\nProper rigging techniques\n\nProper use of the ANSI hand signals\nCrane limitations\nCrane characteristics and dynamics\nSignalperson requirements per OSHA 1926.1419-1926.1422\nWorking near power lines\nVoice signals \n\nThis training meets the requirements mandated in OSHA 1926.1419 through \n1926.1422 and 1926.1428\, and ANSI/ASME B30 standards. \nFor more information as to the content of this class\, please view the descriptions here. \nTraining Length: \n\n4 to 6 hour course\n\nParticipants will receive a card certifying that they have successfully completed this training that they should carry on the job-site. \nUse this form below to request more information about our signalperson/rigger course. One of our staff will be in contact with you soon.  \nPlease enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some\, but not all\, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal\, daily inspections\, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course\, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links\, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYother		\n			share if Courses\n			\n		\n		other locationDo you want to give us a call right now?Yes :  please submit this form first\, and then call 1-866-788-7600It's after hours or I can't chat right now\, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed\, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal\, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes\, please do contact me.Submit   \n 
URL:https://cranes101.com/event/july18-signalperson-with-basic-rigging-century-drywall-private/
LOCATION:Lincoln\, RI\, Lincoln\, Rhode Island
CATEGORIES:Construction Courses,Industrial Courses
ATTACH;FMTTYPE=image/jpeg:https://cranes101.com/wp-content/uploads/2019/12/Signalperson_Rigger.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250729T080000
DTEND;TZID=America/New_York:20250729T160000
DTSTAMP:20260531T103606
CREATED:20250620T171700Z
LAST-MODIFIED:20250620T171700Z
UID:10000254-1753776000-1753804800@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - VT TEL - CLOSED
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \nPlease enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some\, but not all\, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal\, daily inspections\, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course\, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links\, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother location		\n			you email/phone/text) trainings\n			\n		\n		Do you want to give us a call right now?Yes :  please submit this form first\, and then call 1-866-788-7600It's after hours or I can't chat right now\, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed\, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal\, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes\, please do contact me.Submit   \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon. \nPlease enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *		\n			Heavy with? #\n			\n		\n		Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some\, but not all\, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal\, daily inspections\, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course\, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links\, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes :  please submit this form first\, and then call 1-866-788-7600It's after hours or I can't chat right now\, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed\, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal\, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes\, please do contact me.Submit
URL:https://cranes101.com/event/july29-bucket-truck-operator-safety-training/
LOCATION:N. Springfield\, VT\, N. Springfield\, Vermont
CATEGORIES:Construction Courses,Industrial Courses
ATTACH;FMTTYPE=image/jpeg:https://cranes101.com/wp-content/uploads/2023/08/Raytheon-CA.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250804T063000
DTEND;TZID=America/New_York:20250804T150000
DTSTAMP:20260531T103606
CREATED:20250723T154421Z
LAST-MODIFIED:20250723T154421Z
UID:10000266-1754289000-1754319600@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - O'Connell Landscape - Anaheim CA - PRIVATE
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \nPlease enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip Code		\n			you can Equipment\n			\n		\n		What can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some\, but not all\, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal\, daily inspections\, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course\, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links\, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes :  please submit this form first\, and then call 1-866-788-7600It's after hours or I can't chat right now\, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed\, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal\, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes\, please do contact me.Submit   \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon. \nPlease enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip Code		\n			any other Equipment\n			\n		\n		What can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some\, but not all\, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal\, daily inspections\, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course\, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links\, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes :  please submit this form first\, and then call 1-866-788-7600It's after hours or I can't chat right now\, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed\, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal\, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes\, please do contact me.Submit
URL:https://cranes101.com/event/august4-bucket-truck-operator-safety-training/
LOCATION:Anaheim\, CA\, Anaheim\, California
CATEGORIES:Construction Courses,Industrial Courses
ATTACH;FMTTYPE=image/jpeg:https://cranes101.com/wp-content/uploads/2025/06/bucket-truck-tree-work.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250813T080000
DTEND;TZID=America/New_York:20250813T160000
DTSTAMP:20260531T103606
CREATED:20250723T155551Z
LAST-MODIFIED:20250723T155837Z
UID:10000267-1755072000-1755100800@cranes101.com
SUMMARY:Bucket Truck Operator Safety Training with Qualifications - Wilmington DPW - PRIVATE
DESCRIPTION:This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course: \n\n    Bucket truck setup\n    The mechanics of the bucket truck\n    Daily inspections\n    Working near electricity\n    ANSI and OSHA standards\n    Proper harness/belt configurations\n    Emergency procedures\n    Proper care and maintenance\n    Suspension trauma\n\nThis training meets or exceeds all requirements of OSHA\, ANSI A92.2 and your insurance company. \nThere will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site.  Each operator will be required to run through a variety of tasks to insure competence on the equipment.  You must qualify on the equipment you use or on equipment that is the same configuration as your equipment.  Please make arrangements to have your bucket truck on site for compliance. \nFor more information as to the content of this class\, please view the description here. \nTraining Length: \n\n4-5 hours safety training course\nAllow 15-20 minutes per qualification\nRecommend maximum of 12-14 attendees (7 minimum)\n\nUse this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon. \nPlease enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some\, but not all\, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal\, daily inspections\, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course\, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOther		\n			services can Amount\n			\n		\n		Heavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links\, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes :  please submit this form first\, and then call 1-866-788-7600It's after hours or I can't chat right now\, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed\, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal\, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes\, please do contact me.Submit   \n  \nOPERATOR QUALIFICATIONS \nIn addition to equipment specific safety training\, OSHA requires operators to be evaluated on the equipment they operate.  While this can be done by a supervisor\, most of our customers prefer a 3rd party evaluation.  Operators receive a certificate as well as a wallet card which includes the make\, model and serial number of the equipment they were tested on. \nWe offer hands-on qualification on various types of equipment including forklift\, MEWP\, bucket trucks and mobile cranes.  We can provide the evaluations with or without a safety training class\, but recommend holding both on the same day – safety training class in the morning\, lunch break\, qualifications in the afternoon. \nPlease contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon. \nPlease enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some\, but not all\, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal\, daily inspections\, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course\, in person exams		\n			about Amount and\n			\n		\n		What in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links\, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes :  please submit this form first\, and then call 1-866-788-7600It's after hours or I can't chat right now\, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed\, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal\, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes\, please do contact me.Submit
URL:https://cranes101.com/event/aug13-bucket-truck-operator-safety-training-with-qualifications-wilmington-dpw-private/
LOCATION:Wilmington\, MA\, Wilmington\, Massachusetts
CATEGORIES:Construction Courses,Industrial Courses
ATTACH;FMTTYPE=image/jpeg:https://cranes101.com/wp-content/uploads/2025/06/bucket-truck-tree-work.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250820T180000
DTEND;TZID=America/New_York:20250820T233000
DTSTAMP:20260531T103606
CREATED:20250827T171947Z
LAST-MODIFIED:20250827T175105Z
UID:10000283-1755712800-1755732600@cranes101.com
SUMMARY:Customized – Signal Person with Basic Rigging Training with Forklifts – Kens Foods – Marlboro MA – PRIVATE
DESCRIPTION:This class has been customized per the customer’s needs/request.  It also includes forklift specific rigging to their applications.   If you have a custom scenario please ask! \n  \nThis live signalperson/basic rigger certification course covers: \n\nRigging component identification\nMathematical calculations\nSling selection\nRigging inspection\nWire rope and chain design\nProper rigging techniques\n\nProper use of the ANSI hand signals\nCrane limitations\nCrane characteristics and dynamics\nSignalperson requirements per OSHA 1926.1419-1926.1422\nWorking near power lines\nVoice signals \n\nThis training meets the requirements mandated in OSHA 1926.1419 through \n1926.1422 and 1926.1428\, and ANSI/ASME B30 standards. \nFor more information as to the content of this class\, please view the descriptions here. \nTraining Length: \n\n4 to 6 hour course\n\nParticipants will receive a card certifying that they have successfully completed this training that they should carry on the job-site. \nUse this form below to request more information about our signalperson/rigger course. One of our staff will be in contact with you soon.  \nPlease enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some\, but not all\, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal\, daily inspections\, or other non-training-relatedPay or Locate an Invoice		\n			us? trainings issue\n			\n		\n		Nationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course\, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links\, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes :  please submit this form first\, and then call 1-866-788-7600It's after hours or I can't chat right now\, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed\, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal\, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes\, please do contact me.Submit
URL:https://cranes101.com/event/aug20-customized-signal-person-with-basic-rigging-training-with-forklifts-kens-foods-marlboro-ma-private/
LOCATION:Marlboro\, MA\, Marlboro\, Massachusetts
CATEGORIES:Construction Courses,Industrial Courses
ATTACH;FMTTYPE=image/jpeg:https://cranes101.com/wp-content/uploads/2019/12/Signalperson_Rigger.jpg
END:VEVENT
END:VCALENDAR