Bucket Truck Operator Safety Training with Qualifications - NHDOT - Hampton NH - CLOSED
2025-04-16 08:00 - 16:00 (America/New_York) | Tennessee
This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:

Bucket truck setup
The mechanics of the bucket truck
Daily inspections
Working near electricity
ANSI and OSHA standards
Proper harness/belt configurations
Emergency procedures
Proper care and maintenance
Suspension trauma

This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company.
There will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site. Each operator will be required to run through a variety of tasks to insure competence on the equipment. You must qualify on the equipment you use or on equipment that is the same configuration as your equipment. Please make arrangements to have your bucket truck on site for compliance.
For more information as to the content of this class, please view the description here.
Training Length:

4-5 hours safety training course
Allow 15-20 minutes per qualification
Recommend maximum of 12-14 attendees (7 minimum)

Use this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon.

OPERATOR QUALIFICATIONS
In addition to equipment specific safety training, OSHA requires operators to be evaluated on the equipment they operate. While this can be done by a supervisor, most of our customers prefer a 3rd party evaluation. Operators receive a certificate as well as a wallet card which includes the make, model and serial number of the equipment they were tested on.
We offer hands-on qualification on various types of equipment including forklift, MEWP, bucket trucks and mobile cranes. We can provide the evaluations with or without a safety training class, but recommend holding both on the same day – safety training class in the morning, lunch break, qualifications in the afternoon.
Please contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.

Bucket Truck Operator Safety Training with Qualifications - MA DOT - Arlington, MA - CLOSED
2025-04-17 07:30 - 15:30 | Tennessee

Overhead Crane Operator Safety Course with Specialty Rigging and Qualifications - Primetals - CLOSED
2025-04-22 07:30 - 15:30 | Tennessee
This overhead crane operator safety training course covers operation, inspection, rigging, owners’ responsibility and operators’ responsibility. It includes hands on operator evaluations as well.
This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1)
A completion of safety training certificate is awarded by Cranes 101. Operators who successfully pass the hands on qualification receive a Qualified Operator certificate as well as a wallet card

For more information as to the content of this class, please view the description here.
Training Length:

3 to 4 Hours for the course; additional time needed if operator qualification to be included

Use this form below to request more information. One of our staff will be in contact with you soon.

This class has been customized to this customer’s specific needs. Cranes101 will work with your company to design a specialized safety training program for your application. Please contact us to set up a consultation or discuss your requirements with us.

OPERATOR QUALIFICATIONS
In addition to equipment specific safety training, OSHA requires operators to be evaluated on the equipment they operate. While this can be done by a supervisor, most of our customers prefer a 3rd party evaluation. Operators receive a certificate as well as a wallet card which includes the make, model and serial number of the equipment they were tested on.
We offer hands-on qualification on various types of equipment including forklift, MEWP, bucket trucks and mobile cranes. We can provide the evaluations with or without a safety training class, but recommend holding both on the same day – safety training class in the morning, lunch break, qualifications in the afternoon.

Mobile Crane Nationally Accredited Certification Program - National Grid - Albany NY - CLOSED
2025-04-23 08:00 - 2025-04-25 16:00 | Tennessee
These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.
For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible.

Fixed/rotating boom trucks
Telescopic boom truck/rough terrain crane/all terrain crane
Lattice boom cranes

TCIA Members save 10% and will earn 21 CTSP CEU’s when the course is completed.
If you are a member of the ISA, our training is certified for the following:

8 Practice
8 Management
16 Climber Specialist
16 Certified Arborist
16 Utility Specialist
16 Municipal Specialist – 16 Aerial Lift

Training Length:
Day One

Classroom instruction on crane operator safety

Day Two*

Classroom instruction in the morning – Testing (written and/or practical exams) begins after lunch

Day Three*

Remaining Exams (written and/or practical)

*Exam schedule may vary based on class size, weather and practical examiner/proctor availability.
Both the written and the practical examinations must be passed with a score of 80 or higher before a nationally accredited crane operator license can be granted.

Use this form below to pre-register for this Mobile Crane Nationally Accredited Certificate Course or request more information. One of our staff will be in contact with you soon.

Mobile Crane Nationally Accredited Certification Program - NRLA - Jaffrey NH - CLOSED
2025-04-23 08:00 - 2025-04-25 16:00 | Tennessee

Tentative - Mobile Crane Nationally Accredited Certification Program - Central Hudson - CLOSED
2025-04-29 08:00 - 2025-05-01 16:00 | Tennessee
These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.
For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible.

Fixed/rotating boom trucks
Telescopic boom truck/rough terrain crane/all terrain crane
Lattice boom cranes

TCIA Members save 10% and will earn 21 CTSP CEU’s when the course is completed.
If you are a member of the ISA, our training is certified for the following:

8 Practice
8 Management
16 Climber Specialist
16 Certified Arborist
16 Utility Specialist
16 Municipal Specialist – 16 Aerial Lift

Training Length:
Day One

Classroom instruction on crane operator safety

Day Two*

Classroom instruction in the morning – Testing (written and/or practical exams) begins after lunch

Day Three*

Remaining Exams (written and/or practical)

*Exam schedule may vary based on class size, weather and practical examiner/proctor availability.
Both the written and the practical examinations must be passed with a score of 80 or higher before a nationally accredited crane operator license can be granted.

This class is closed/full. To request information about hosting a class similar to this one, please complete this form below and one of our staff will be in contact with you soon.

Bucket Truck Operator Safety Training with Qualifications - NH DOT - Bedford NH - CLOSED
2025-04-30 08:00 - 16:00 | Tennessee

Mobile Crane Nationally Accredited Certification Program - National Sign - CT
2025-04-30 08:00 - 2025-05-02 16:00 | Tennessee

Mobile Crane Nationally Accredited Certification Program - Bellingham MA - OPEN REGISTRATION
2025-05-07 08:00 - 2025-05-09 16:00, 2025-06-11 08:00 - 2025-06-13 16:00 | Tennessee

2A/1B/1C MA Hoisting License Preparation/Continuing Education Course - Bellingham MA - OPEN
2025-05-10 08:00 - 17:30 | Tennessee
You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date.Then take the class closest to the test date.
For more information as to the content of this class, please view the descriptions here.
Attendees are only required to attend the course(s) they need. If you are looking for a license preparation for another restriction that is not listed, please let us know. We offer all license classes (1-3’s). We do not have license preparation classes for the 4’s, just online continuing education courses.

This is also a safety seminar that will earn the operator his/hers required CEU
Training Length – License Preparation
2A: 8-12 1B: 12-5:30 (1C will be incorporated as part of 1B)
Use this form below to request more information on attending one of our monthly open classes or to host a class at your location. One of our staff will be in contact with you soon.

Bucket Truck Safety Training with Operator Evaluations - MA DOT - Northampton MA - CLOSED
2025-05-13 07:30 - 15:30 | Tennessee

Mobile Crane Nationally Accredited Certification Program-Educational Trust - Flushing NY - CLOSED
2025-05-13 08:00 - 2025-05-15 16:00 | Tennessee

Bucket Truck Operator Safety Training with Evaluations - MA DOT - Weston MA - CLOSED
2025-05-14 07:30 - 15:30 | Tennessee

Bucket Truck Operator Safety Training with Qualifications - NH DOT - Hooksett - CLOSED
2025-05-15 08:00 - 16:00 | Tennessee

Bucket Truck Inspection with Dielectric Testing - Bellingham MA - OPEN REGISTRATION - Call 508-966-4100
2025-05-29 08:00 - 2025-05-30 15:00 | Cranes101, 57 Mendon Street, Bellingham, MA, 02019, United States
Vehicle Mounted Aerial Lift Inspection Training
This course offers training on conducting dielectric tests on aerial devices to measure any potential conductivity on insulated components and is best designed for experienced operators and mechanics who are interested in becoming the on-site equipment inspectors for their company.
This course is designed to cover the latest revisions of all relevant government and industry standards (OSHA and ANSI/ASME) with regards to how they should be used during inspections and creating reports detailing any deficiencies and recommendations.
Material covered includes:

How the OSHA and ASME Standards apply to dielectric testing
Describing aerial device components
Step-by-step procedures on conducting dielectric tests using a HiPot
Interpreting dielectric test results
Hand-on Training and practice.

Hi Rail Gear Inspection Training - Bellingham, MA - OPEN Registration - call 508-966-4100
2025-05-31 08:00 - 15:00 | Cranes101, 57 Mendon Street, Bellingham, MA, 02019, United States
This course is best designed for experienced operators and mechanics who are interested in becoming the on-site inspectors for their company.
This course is designed to cover the Federal Railroad Administration 49 CFR 214 standards with regards to how they should be used during inspections and creating reports detailing any deficiencies and recommendations.

Course Content

How the standards apply to inspections
What equipment is made by manufacturers
Hi Rail Gear Components
Step-by-step inspection procedures

Cranes101 can bring this class to you. Please contact us to schedule your special training session.

Mobile Crane Inspection Course - Bellingham, MA - OPEN Registration - call 508-966-4100
2025-06-03 08:00 - 2025-06-06 16:00 | Tennessee
This mobile crane inspection course is the most current and comprehensive course of its kind in the US to certify crane inspectors. This course is best designed for experienced crane operators and mechanics who are interested in becoming the on-site inspectors for their company.
This 4 day class is designed to cover the latest revisions of all relevant government and industry standards (OSHA, ASME, and SAE) with regards to how they should be used during crane inspections and creating reports detailing any deficiencies and recommendations. Cost per attendee is $2495.
Course Content:

How the OSHA, ASME and SAE standards apply to crane inspections
Describing crane components
Confirming the accuracy of a crane computer’s functions
Step-by-step inspection procedures
Specific load/proof testing procedures
Identifying and documenting deficiencies and making recommendations
Hands-on inspection training
Identifying accident causes through case studies

Class Structure:

Days 1-2: classroom learning
Day 3: classroom learning followed by hands-on training of inspection and load/proof testing procedures
Day 4: completion of hands-on and administration of final exam

This class is only held 1-2 times per year and currently only held at our Bellingham, MA location until otherwise announced.

Use this form below to request more information. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid Class
to many issue

Attendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit

1C/2A/4G MA Municipality Hoisting License Preparation - Chelsea Housing Authority - CLOSED
2025-06-04 08:00 - 16:00 | Chelsea, MA, Chelsea, Massachusetts
You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date.Then take the class closest to the test date.
For more information as to the content of this class, please view the descriptions here.

Use this form below to request more information on attending one of our monthly open classes or to host a class at your location. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip Code
that (by that

What can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit

Fork Truck Operator Certification with Operator Evaluations - JA Miara - CLOSED
2025-06-06 08:00 - 16:00 | Wilmington, MA, Wilmington, Massachusetts
This forklift operator safety training course is a focused operations and safety training for operators.
Industrial forklifts are covered in this class. Rough terrain forklifts can be covered by special request. Operator qualification will be performed. A completion of safety training certificate is awarded by Cranes 101. Operators who successfully pass the hands on qualification receive a Qualified Operator certificate as well as a wallet card
Material covered in this course:
Fork truck maneuvering
The mechanics of the Fork Truck
Daily inspections
Fuel/Electric storage
ANSI and OSHA standards
Safe practices
Proper care and maintenance
Physics 101
This training meets or exceeds all requirements of OSHA 1910.172
For more information as to the content of this class, please view the descriptions here. (Hyperlink the “here” to the specific page on the web site showing this class)
Training Length:
>>3 to 4 Hour Course
Use this form below to request more information. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #
Heavy License Address

Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit

OPERATOR QUALIFICATIONS
In addition to equipment specific safety training, OSHA requires operators to be evaluated on the equipment they operate. While this can be done by a supervisor, most of our customers prefer a 3rd party evaluation. Operators receive a certificate as well as a wallet card which includes the make, model and serial number of the equipment they were tested on.
We offer hands-on qualification on various types of equipment including forklift, MEWP, bucket trucks and mobile cranes. We can provide the evaluations with or without a safety training class, but recommend holding both on the same day – safety training class in the morning, lunch break, qualifications in the afternoon.
Please contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.
Attendance inspection Options

Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit

2A/1B/1C MA Hoisting License Preparation/Continuing Education Course - Bellingham MA - OPEN
2025-06-07 08:00 - 17:30 | Tennessee
You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date.Then take the class closest to the test date.
For more information as to the content of this class, please view the descriptions here.
Attendees are only required to attend the course(s) they need. If you are looking for a license preparation for another restriction that is not listed, please let us know. We offer all license classes (1-3’s). We do not have license preparation classes for the 4’s, just online continuing education courses.

This is also a safety seminar that will earn the operator his/hers required CEU
Training Length – License Preparation
2A: 8-12 1B: 12-5:30 (1C will be incorporated as part of 1B)
Use this form below to request more information on attending one of our monthly open classes or to host a class at your location. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.
in-person be assistance:

Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit

Vehicle Mounted Aerial Lift Inspection Training - GMB Powerline Services - WV - CLOSED
2025-06-09 08:00 - 2025-06-10 15:00 | Charleston, WV, Charleston, West Virginia
Bucket Truck Inspection with Dielectric Testing
This course offers training on conducting dielectric tests on aerial devices to measure any potential conductivity on insulated components and is best designed for experienced operators and mechanics who are interested in becoming the on-site equipment inspectors for their company.
This course is designed to cover the latest revisions of all relevant government and industry standards (OSHA and ANSI/ASME) with regards to how they should be used during inspections and creating reports detailing any deficiencies and recommendations.
Material covered includes:

How the OSHA and ASME Standards apply to dielectric testing
Describing aerial device components
Step-by-step procedures on conducting dielectric tests using a HiPot
Interpreting dielectric test results
Hand-on Training and practice.

Bucket Truck Operator Safety Training - OPEN REGISTRATION* - Bellingham MA - BYOBT - call 508-966-4100
2025-06-10 08:00 - 16:00 | Bellingham, MA, Bellingham, MA, United States
*this class will only be held with a minimum attendance registered
BYOBT – Bring your own Bucket Truck to Bellingham! Our instructor will provide your safety training and then your evaluation on YOUR truck! Space is limited to 14 attendees with a minimum of 6 required to hold the class. Special discounted pricing of just $405 for safety training course PLUS evaluation. (regular pricing is $455)
This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:

Bucket truck setup
The mechanics of the bucket truck
Daily inspections
Working near electricity
ANSI and OSHA standards
Proper harness/belt configurations
Emergency procedures
Proper care and maintenance
Suspension trauma

This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company.
There will be hands-on review of the equipment. Our trainer will go over proper pre-use inspections as well as proper setup of the bucket truck on-site. Each operator will be required to run through a variety of tasks to insure competence on the equipment. You must qualify on the equipment you use or on equipment that is the same configuration as your equipment. Please make arrangements to have your bucket truck on site for compliance.
For more information as to the content of this class, please view the description here.
Training Length:

4-5 hours safety training course
Allow 15-20 minutes per qualification
Recommend maximum of 12-14 attendees (7 minimum)

Use this form below to request more information about our bucket truck operator safety course. One of our staff will be in contact with you soon.

OPERATOR QUALIFICATIONS
In addition to equipment specific safety training, OSHA requires operators to be evaluated on the equipment they operate. While this can be done by a supervisor, most of our customers prefer a 3rd party evaluation. Operators receive a certificate as well as a wallet card which includes the make, model and serial number of the equipment they were tested on.
We offer hands-on qualification on various types of equipment including forklift, MEWP, bucket trucks and mobile cranes. We can provide the evaluations with or without a safety training class, but recommend holding both on the same day – safety training class in the morning, lunch break, qualifications in the afternoon.
Please contact our office at 508-966-4100 or use this form below to request more information. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.
assistance: we Operator

Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit

Overhead Crane Operator Safety Course with Qualifications - Fischbach & Moore - VA Beach - CLOSED
2025-06-11 08:00 - 15:00 | Virginia Beach, Virginia Beach, Virginia
This overhead crane operator safety training course covers operation, inspection, rigging, owners’ responsibility and operators’ responsibility. It includes hands on operator evaluations as well.
This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1)
A completion of safety training certificate is awarded by Cranes 101. Operators who successfully pass the hands on qualification receive a Qualified Operator certificate as well as a wallet card

For more information as to the content of this class, please view the description here.
Training Length:

3 to 4 Hours for the course; additional time needed if operator qualification to be included

Use this form below to request more information. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)
did other and

Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit

Hi Rail Gear Inspection Training - Hoods Automotive - Bridgeton, MO
2025-06-12 08:00 - 15:00 | Bridgeton, MO, Bridgeton, Missouri
This course is best designed for experienced operators and mechanics who are interested in becoming the on-site inspectors for their company.
This course is designed to cover the Federal Railroad Administration 49 CFR 214 standards with regards to how they should be used during inspections and creating reports detailing any deficiencies and recommendations.

Course Content

How the standards apply to inspections
What equipment is made by manufacturers
Hi Rail Gear Components
Step-by-step inspection procedures

Cranes101 can bring this class to you. Please contact us to schedule your special training session.

Use this form below to request more information. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOther
Type call the

Heavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit

Customized Overhead Crane Operator Safety Course with Evaluations - Primetals - CLOSED
2025-06-19 07:30 - 15:30 | Sutton, MA, Sutton, Massachusetts
This overhead crane operator safety training course covers operation, inspection, rigging, owners’ responsibility and operators’ responsibility. It includes hands on operator evaluations as well.
This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1)
A completion of safety training certificate is awarded by Cranes 101. Operators who successfully pass the hands on qualification receive a Qualified Operator certificate as well as a wallet card

For more information as to the content of this class, please view the description here.
Training Length:

3 to 4 Hours for the course; additional time needed if operator qualification to be included

Use this form below to request more information. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOther
assist a by?

Any details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit
——————————————————————————————————————–

This class has been customized to this customer’s specific needs. Cranes101 will work with your company to design a specialized safety training program for your application. Please contact us to set up a consultation or discuss your requirements with us.

Massachusetts 1C Hoisting License Preparation with Forklift Safety and Operator Evaluations - Fischbach & Moore - Braintree, MA - CLOSED
2025-06-20 06:00 - 14:00 | Braintree, MA, Braintree, Massachusetts
You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law.
Cranes101 curriculum has been approved by the State of Massachusetts and contains the proper content per the 520 CMR 6.04(b)6. This is a safety seminar that will earn the operator his/hers required CEUs. These courses will allow you to renew your Massachusetts Hoisting Engineer License and are required every two years for each restriction you hold. We also offer these classes online. Go to our website to register for an online course.
Use this form below to request more information about holding a private class at your location or attending one of our monthly open registration classes at our Bellingham MA location. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOther
Operator of you

Any details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit

MA Hoisting Continuing Education Class - Multiple Restrictions - MASS DOC - Milford, MA
2025-06-20 08:00 - 16:00 | Milford, MA, Milford, Massachusetts
You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law.
Cranes101 curriculum has been approved by the State of Massachusetts and contains the proper content per the 520 CMR 6.04(b)6. This is a safety seminar that will earn the operator his/hers required CEUs. These courses will allow you to renew your Massachusetts Hoisting Engineer License and are required every two years for each restriction you hold. We also offer these classes online. Go to our website to register for an online course.
Use this form below to request more information about holding a private class at your location or attending one of our monthly open registration classes at our Bellingham MA location. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *
May email/phone/text) call

Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit

Overhead Crane Operator Safety Course with Operator Qualifications - Brazonics - CLOSED
2025-06-23 08:00 - 17:00 | Hampton, NH, Hampton, New Hampshire
This overhead crane operator safety training course covers operation, inspection, rigging, owners’ responsibility and operators’ responsibility. It includes hands on operator evaluations as well.
This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1)
A completion of safety training certificate is awarded by Cranes 101. Operators who successfully pass the hands on qualification receive a Qualified Operator certificate as well as a wallet card

For more information as to the content of this class, please view the description here.
Training Length:

3 to 4 Hours for the course; additional time needed if operator qualification to be included

Use this form below to request more information. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *
Accredited location did

Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit

OPERATOR QUALIFICATIONS
In addition to equipment specific safety training, OSHA requires operators to be evaluated on the equipment they operate. While this can be done by a supervisor, most of our customers prefer a 3rd party evaluation. Operators receive a certificate as well as a wallet card which includes the make, model and serial number of the equipment they were tested on.
We offer hands-on qualification on various types of equipment including forklift, MEWP, bucket trucks and mobile cranes. We can provide the evaluations with or without a safety training class, but recommend holding both on the same day – safety training class in the morning, lunch break, qualifications in the afternoon.

Overhead Crane Operator Safety Coursewith Operator Qualifications - Collins Aerospace - CLOSED
2025-06-23 09:00 - 15:00 | Westford, MA, Westford, MA, United States
This overhead crane operator safety training course covers operation, inspection, rigging, owners’ responsibility and operators’ responsibility. It includes hands on operator evaluations as well.
This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1)
A completion of safety training certificate is awarded by Cranes 101. Operators who successfully pass the hands on qualification receive a Qualified Operator certificate as well as a wallet card

For more information as to the content of this class, please view the description here.
Training Length:

3 to 4 Hours for the course; additional time needed if operator qualification to be included

Use this form below to request more information. One of our staff will be in contact with you soon.
Please enable JavaScript in your browser to complete this form.Please enable JavaScript in your browser to complete this form.Contact Name *FirstLastBusiness Name *Email *Phone *Address *Address Line 1City--- Select state ---AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyomingStateZip CodeWhat can we help you with? *Nationally Accredited Mobile Crane Operator License CoursesMA OPSI SafetyWorks Workplace Training GrantOnline Training (available for some, but not all, courses)In Person TrainingOSHA Compliant Annual InspectionsRepairsExpert Witness / ConsultingTech Support - portal, daily inspections, or other non-training-relatedPay or Locate an InvoiceNationally Accredited Mobile Crane Operator License CoursesIn PersonHybrid - online course, in person examsWhat in-person trainings are you interested in?Nationally Accredited Mobile Crane Operator License Classes (Live and Hybrid Options Available)Heavy Equipment Operator Safety (Live and Online Options Available)State Licensing Preparation (MA/RI/CT/NY)Heavy Equipment Inspection TrainingSignal Person / Basic Rigging ClassesOtherHeavy Equipment Operator Safety CoursesForkliftOverhead CraneBucket TruckMEWP / Personnel LiftInspector Certification OptionsHi Rail Gear Inspector CertificationBucket Truck Inspector Certification with DielectricMobile Crane Inspector CertificationStateMA - Continuing EducationMA - License PrepRI (online only: Mobile Crane or Excavator)CT (online only)NY (online only)Class TypeHosting a classSending an attendee to an open classPotentially open to eitherHow many attendees? *How can we assist you with online classes?Want to sign up for a classNeed the list of currently available classesI need to reset my password for the Moodle online learning platform. I'll try this link!I tried those links, but didn't get what I needed - please help.I have other questionsI would like more info on NCCER Mobile Crane Online / In Person Hybrid ClassAttendance Optionsas an individualas a host companyEquipment to be inspected: *When do you need this inspection by?Equipment LocationMARICTNHMEVTNYotherother locationDo you want to give us a call right now?Yes : please submit this form first, and then call 1-866-788-7600It's after hours or I can't chat right now, so I'll just hit submit and wait to hear back from you.Please describe the issue you're having and how our experts may be of assistance:Invoice #
this Type How

Amount owed, if you knowWhen was the class or service this invoice is for?Please check any / all that apply to your situation:I'm an existing customer trying to log into the portal, but I can't get inI want to log my daily inspections with your system and need helpI need help with my online classesIt's something elseAnything else?How did you hear about us?Online SearchI've used Cranes101 beforeProfessional OrganizationTrade ShowReferral from Personal Connection in the IndustrySocial MediaReceived a PostcardOtherAny details you can share about referral who/what/where?May we contact you (by email/phone/text) regarding this inquiry and other services that may be relevant to you? *Yes, please do contact me.Submit
