Mobile Crane Nationally Accredited Certification Program - Bellingham MA OPEN REGISTRATIONCall 508-966-4100-
2025-01-22 08:00 - 2025-01-24 16:00 (America/New_York) | MA
These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.
For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible.

Fixed/rotating boom trucks
Telescopic boom truck/rough terrain crane/all terrain crane
Lattice boom cranes

TCIA Members save 10% and will earn 21 CTSP CEU’s when the course is completed.
If you are a member of the ISA, our training is certified for the following:

8 Practice
8 Management
16 Climber Specialist
16 Certified Arborist
16 Utility Specialist
16 Municipal Specialist – 16 Aerial Lift

Training Length:
Day One

Classroom instruction on crane operator safety

Day Two*

Classroom instruction in the morning – Testing (written and/or practical exams) begins after lunch

Day Three*

Remaining Exams (written and/or practical)

*Exam schedule may vary based on class size, weather and practical examiner/proctor availability.
Both the written and the practical examinations must be passed with a score of 80 or higher before a nationally accredited crane operator license can be granted.

Use this form below to pre-register for this Mobile Crane Nationally Accredited Certificate Course or request more information. One of our staff will be in contact with you soon.

Signal Person with Basic Rigger Training - United Civil - Danvers, MA - CLOSED
2025-01-23 08:00 - 15:00, 2025-01-28 08:00 - 15:00, 2025-01-30 08:00 - 15:00
This live signalperson/basic rigger certification course covers:

Rigging component identification
Mathematical calculations
Sling selection
Rigging inspection
Wire rope and chain design
Proper rigging techniques

Proper use of the ANSI hand signals
Crane limitations
Crane characteristics and dynamics
Signalperson requirements per OSHA 1926.1419-1926.1422
Working near power lines
Voice signals

This training meets the requirements mandated in OSHA 1926.1419 through
1926.1422 and 1926.1428, and ANSI/ASME B30 standards.
For more information as to the content of this class, please view the descriptions here.
Training Length:

4 to 6 hour course

Participants will receive a card certifying that they have successfully completed this training that they should carry on the job-site.
Use this form below to request more information about our signalperson/rigger course. One of our staff will be in contact with you soon.

Bucket Truck Inspection with Dielectric Testing - Divergent Alliance - Liverpool NY
2025-01-23 08:00 - 2025-01-24 15:00
This course offers training on conducting dielectric tests on aerial devices to measure any potential conductivity on insulated components and is best designed for experienced operators and mechanics who are interested in becoming the on-site equipment inspectors for their company.
This course is designed to cover the latest revisions of all relevant government and industry standards (OSHA and ANSI/ASME) with regards to how they should be used during inspections and creating reports detailing any deficiencies and recommendations.
Material covered includes:

How the OSHA and ASME Standards apply to dielectric testing
Describing aerial device components
Step-by-step procedures on conducting dielectric tests using a HiPot
Interpreting dielectric test results
Hand-on Training and practice.

Use this form below to request more information. One of our staff will be in contact with you soon.

Overhead Crane - Basic Lifting Course with Rigging (Specialty) - Rolls Royce - Walpole - CLOSED
2025-01-23 15:00 - 19:00
This overhead crane operator safety training course covers operation, inspection, rigging, owners’ responsibility and operators’ responsibility. It includes hands on operator evaluations as well.
This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1)

This class is closed/full. To request information about hosting a class similar to this one, please complete this form below and one of our staff will be in contact with you soon.

Hi Rail Gear Inspection Training - Authority Fleet Service - NY - CLOSED
2025-01-25 07:00 - 13:00
This course is best designed for experienced operators and mechanics who are interested in becoming the on-site inspectors for their company.
This course is designed to cover the Federal Railroad Administration 49 CFR 214 standards with regards to how they should be used during inspections and creating reports detailing any deficiencies and recommendations.

Course Content

How the standards apply to inspections
What equipment is made by manufacturers
Hi Rail Gear Components
Step-by-step inspection procedures

Cranes101 can bring this class to you. Please contact us to schedule your special training session.
This class is closed/full. To request information about hosting a class similar to this one, please complete this form below and one of our staff will be in contact with you soon.

MEWP - Mobile Elevated Work Platforms (Personnel/Boom/Aerial/Scissor Lift Operator Safety Training) - Shawmut Metals- CLOSED
2025-01-27 08:00 - 16:00
This mobile elevated work platform operator safety training course is a focused operations and safety training for operators. All MEWP varieties (Personnel Lifts, Boom Lifts and Scissor Lifts) are covered in this class. A completion of safety training certificate is awarded by Cranes 101. Operators who successfully pass the hands on qualification receive a Qualified Operator certificate as well as a wallet card
Material covered in this course:

Personnel lift maneuvering
The mechanics of the personnel lift
Daily inspections
Fuel/Electric storage
ANSI and OSHA standards
Safe practices
Proper care and maintenance
Physics 101
Suspension trauma
Working near power lines

This training meets or exceeds all requirements of OSHA 1910.67 and ANSI A92.22.
For more information as to the content of this class, please view the descriptions here.
Training Length:

3 to 4 hour course

Use this form below to request more information about our personnel lift operator safety training course. One of our staff will be in contact with you soon.

OPERATOR QUALIFICATIONS
In addition to equipment specific safety training, OSHA requires operators to be evaluated on the equipment they operate. While this can be done by a supervisor, most of our customers prefer a 3rd party evaluation. Operators receive a certificate as well as a wallet card which includes the make, model and serial number of the equipment they were tested on.
We offer hands-on qualification on various types of equipment including forklift, MEWP, bucket trucks and mobile cranes. We can provide the evaluations with or without a safety training class, but recommend holding both on the same day – safety training class in the morning, lunch break, qualifications in the afternoon.

Fall Protection - Shawmut Metals - CLOSED
2025-01-28 08:00 - 15:00
Material covered in this course:

Proper body harness donning instructions
Daily inspections of body harnesses
ANSI and OSHA standards
Proper care and maintenance
Fall protection
Suspension trauma
Basic emergency procedures

This fall protection safety training and certification is compliant with the OSHA standards 1910.140 – Personal fall protection systems, 1910.502 – Fall protection systems criteria and practices, and ANSI/ASSE Z359.11 – Safety Requirements for Full Body Harnesses.

Mobile Crane Nationally Accredited Certification Program - Educational & Cultural Trust, NY - CLOSED
2025-01-28 08:00 - 2025-01-31 16:00
These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.
For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible.

Fixed/rotating boom trucks
Telescopic boom truck/rough terrain crane/all terrain crane
Lattice boom cranes

TCIA Members save 10% and will earn 21 CTSP CEU’s when the course is completed.
If you are a member of the ISA, our training is certified for the following:

8 Practice
8 Management
16 Climber Specialist
16 Certified Arborist
16 Utility Specialist
16 Municipal Specialist – 16 Aerial Lift

Training Length:
Day One

Classroom instruction on crane operator safety

Day Two*

Classroom instruction in the morning – Testing (written and/or practical exams) begins after lunch

Day Three*

Remaining Exams (written and/or practical)

*Exam schedule may vary based on class size, weather and practical examiner/proctor availability.
Both the written and the practical examinations must be passed with a score of 80 or higher before a nationally accredited crane operator license can be granted.

This class is closed/full. To request information about hosting a class similar to this one, please complete this form below and one of our staff will be in contact with you soon.

*This class has been customized for this customer. An additional day has been added to accommodate expected high operator attendance and multiple crane types to be tested on

2A/1C MA Hoisting License Preparation/Continuing Education Course - Boston Ship Repair - CLOSED
2025-01-29 08:00 - 16:00
You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date using this form. Then take the class closest to the test date.
For more information as to the content of this class, please view the descriptions here.

2A/1B MA Hoisting License Preparation Class - Boston DPW - CLOSED
2025-01-30 07:30 - 15:30

Signal Person with Basic Rigger Training - Poyant Signs - MA - CLOSED
2025-01-31 07:30 - 13:30

Overhead Crane Operator Safety Course with qualifications - Primetals - CLOSED
2025-02-03 14:30 - 22:30
This overhead crane operator safety training course covers operation, inspection, rigging, owners’ responsibility and operators’ responsibility. It includes hands on operator evaluations as well.
This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1)
A completion of safety training certificate is awarded by Cranes 101. Operators who successfully pass the hands on qualification receive a Qualified Operator certificate as well as a wallet card

For more information as to the content of this class, please view the description here.
Training Length:

3 to 4 Hours for the course; additional time needed if operator qualification to be included

Use this form below to request more information. One of our staff will be in contact with you soon.

————————————————————————————————————————-

Signal Person with Basic Rigger Training -United Civil - Danvers, MA - CLOSED
2025-02-04 08:00 - 15:00
