Signal Person Rigger Training – PSEG – Melville, NY – CLOSED

Melville, NY Melville, New York

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in […]

Mobile Crane Nationally Accredited Certification Program – Elite Electrical Contractors – KY – CLOSED

Louisville, KY Louisville, Kentucky

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Mobile Crane Nationally Accredited Certification Program – ABC Supply – Pompano Beach – FL

Pompano Beach, FL Pompano Beach, Florida

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Mobile Crane Nationally Accredited Certification Program – PSEG – Melville, NY – CLOSED

Melville, NY Melville, New York

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Mobile Crane Nationally Accredited Certification Program – Patrick Sign – Las Vegas – OPEN

Las Vegas, NV Las Vegas, Nevada

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Overhead Crane Operator Safety Course with Qualifications – Primetals – Sutton, MA – CLOSED

Sutton, MA Sutton, Massachusetts

This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It includes hands-on training as well.  This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) A completion of safety training certificate is awarded […]

Overhead Crane Operator Safety Course – Artisan Industries – CLOSED

Stoughton, MA Stoughton, Massachusetts

This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It includes hands-on training as well.  This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) A completion of safety training certificate is awarded […]

Signal Person Rigger Training – PSEG – Melville, NY – CLOSED

Melville, NY Melville, New York

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in […]

1C MA Hoisting License Preparation/Continuing Education Course – EM Duggan – CLOSED

Canton, MA Canton, Massachusetts

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ […]

Mobile Crane Nationally Accredited Certification Program – PSEG – Melville, NY – CLOSED

Melville, NY Melville, New York

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Overhead Crane Operator Safety Course with Qualifications – Primetals – Sutton, MA – CLOSED

Sutton, MA Sutton, Massachusetts

This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It includes hands-on training as well.  This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) A completion of safety training certificate is awarded […]

Bucket Truck Operator Safety Training – Salem DPW with Qualifications – CLOSED

Salem, MA Salem, Massachusetts

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training […]

Mobile Crane Nationally Accredited Certification Program – Allied Electric Sign – UT

Vineyard, UT Vineyard, UT

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Vehicle Mounted Aerial Lift Inspection Training – Road Machinery – MI – CLOSED

Negaunee, MI Negaunee, Michigan

  Bucket Truck Inspection with Dielectric Testing This course offers training on conducting dielectric tests on aerial devices to measure any potential conductivity on insulated components and is best designed for experienced operators and mechanics who are interested in becoming the on-site equipment inspectors for their company. This course is designed to cover the latest […]

Online Operator Training Classes

Cranes101 HQ Bellingham, MA, United States

Did you know we offer online operator training classes in addition to our live classes? We offer license preparation and continuing education credits for MA hoisting engineer licenses. We also offer signalperson, rigger, and forklift operator safety courses. Do your safety training in the comfort of your own home on your schedule. Click here to […]

Signal Person Rigger (Level1) Training – Lauretano Signs – CLOSED

Terryville, CT Terryville, Connecticut

  Signal Person Rigger (Level1) Training This live signalperson/basic rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This […]

Bucket Truck Operator Safety Training – NH DOT – CLOSED

Concord, NH Concord, New Hampshire

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training […]

Mobile Crane Nationally Accredited Certification Program – Crafts Inc – WI – OPEN

Manitowic, WI Manitowic, Wisconsin

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Bucket Truck Operator Safety Training with Qualifications – UMASS TRANS CTR – Closed

Webster, MA Webster, Massachusetts

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training […]

Mobile Crane Nationally Accredited Certification Program – Bellingham Open (call 508-966-4100 to register)

Bellingham, MA 57 Mendon Street, Bellingham, MA, United States

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

2A/1B/1C MA Hoisting License Preparation/Continuing Education Course – Bellingham MA – OPEN

Bellingham, MA 57 Mendon Street, Bellingham, MA, United States

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ […]

Mobile Crane Nationally Accredited Certification Program – National Grid – Staten Island – CLOSED

Staten Island, NY Staten Island, New York

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Signal Person Rigger (Level1) Training – Bellingham MA – OPEN

Bellingham, MA 57 Mendon Street, Bellingham, MA, United States

This live signalperson/basic rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in […]

Fork Truck Operator Certification with Qualifications – Bomco – Gloucester – CLOSED

gloucester, ma Gloucester, MA

Industrial Forklift Safety Training This forklift operator safety training course is a focused operations and safety training for operators. Industrial forklifts are covered in this class. Rough terrain forklifts can be covered by special request. Operator qualification will be performed. A completion of safety training certificate is awarded by Cranes 101.  Operators who successfully pass […]

Mobile Crane Nationally Accredited Certification Program – Hammond Lumber – Closed

Belgrade, ME Belgrade, Maine

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Overhead Crane Operator Safety Course – Collins Aerospace – CLOSED

Hampton, NH Hampton, NH

This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It includes hands-on training as well.  This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) A completion of safety training certificate is awarded […]

Overhead Crane Operator Safety Course – Collins Aerospace – CLOSED

Hampton, NH Hampton, NH

  This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It includes hands-on training as well. This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) A completion of safety training certificate is […]

Overhead Crane Operator Safety Course with Qualifications – Acme Shorey – Carver MA – CLOSED

Carver, MA Carver, Massachusetts

This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It includes hands-on training as well.  This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) A completion of safety training certificate is awarded […]

Overhead Crane Operator Safety Course with Qualifications – ACME Shorey – CLOSED

Harwich, MA Harwich, Massachusetts

This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It includes hands-on training as well.  This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) A completion of safety training certificate is awarded […]

MA Hoisting Continuing Education Class – Multiple Restrictions – MA DOC – CLOSED

milford, ma Milford, Massachusetts

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. Cranes101 curriculum has been approved by the State of Massachusetts and contains the proper content […]

Scroll to Top