Events Search and Views Navigation

Event Views Navigation

Today

Hi Rail Gear Inspection Training – Interstate Power Services- Sioux Falls SD – OPEN REGISTRATION-Call 508-966-4100

Sioux Falls, SD Sioux Falls, South Dakota

  This course is best designed for experienced operators and mechanics who are interested in becoming the on-site inspectors for their company. This course is designed to cover the Federal Railroad Administration 49 CFR 214 standards with regards to how they should be used during inspections and creating reports detailing any deficiencies and recommendations.   […]

**Signal Person with Basic Rigger Training – Bellingham MA – OPEN REGISTRATION (**minimum 6 attendees required for class to hold)-Call 508-966-4100

Bellingham, MA 57 Mendon Street, Bellingham, MA, United States

This live signalperson/basic rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in […]

Bucket Truck Operator Safety Training with Qualifications – Town of Arlington, MA – CLOSED

Arlington, MA Arlington, Massachusetts

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training […]

Signal Person with Basic Rigger Training – Skyline Roofing – NH – CLOSED

manchester, nh Manchester, New Hampshire

  This live signalperson/basic rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated […]

Hi Rail Gear Inspection Training – Quality Repair Solutions – East St. Louis, IL – OPEN REGISTRATION-Call 508-966-4100

East St. Louis, IL East St. Louis, Illinois

  This course is best designed for experienced operators and mechanics who are interested in becoming the on-site inspectors for their company. This course is designed to cover the Federal Railroad Administration 49 CFR 214 standards with regards to how they should be used during inspections and creating reports detailing any deficiencies and recommendations.   […]

Bucket Truck Operator Safety Training with Qualifications – Town of Marblehead – CLOSED

Marblehead, MA Marblehead, Massachusetts

We provide bucket truck training online and in person, to help you get the required operator qualifications.This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI […]

Signal Person with Basic Rigger Training – Constellation Power – CLOSED

everett, ma Everett, Massachusetts

This live signalperson/basic rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in […]

Signal Person with Basic Rigger Training – Constellation Power – CLOSED

everett, ma Everett, Massachusetts

This live signalperson/basic rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in […]

Bucket Truck Operator Safety Training with Qualifications – Town of Marblehead – CLOSED

Marblehead, MA Marblehead, Massachusetts

We provide bucket truck training online and in person, to help you get the required operator qualifications.This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI […]

Overhead Crane Operator Safety Course with Qualifications – RISEC – Johnston, RI – CLOSED

Johnston, RI Johnston, Rhode Island

This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It includes hands on operator evaluations as well. This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) A completion of safety training certificate […]

Signal Person with Basic Rigger Training – Danvers Electric – CLOSED

Danvers, MA

This live signalperson/basic rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in […]

Signal Person with Basic Rigger Training – Grodsky – Springfield, MA – CLOSED

Springfield, MA Springfield, Massachusetts

  This live signalperson/basic rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated […]

Hi Rail Gear Inspection Training – Kramer Tree – West Chicago IL – OPEN REGISTRATION – call 508-966-4100

West Chicago, IL West Chicago, Illinois

  This course is best designed for experienced operators and mechanics who are interested in becoming the on-site inspectors for their company. This course is designed to cover the Federal Railroad Administration 49 CFR 214 standards with regards to how they should be used during inspections and creating reports detailing any deficiencies and recommendations.   […]

2 DAY NATIONAL CRANE CERTIFICATION PROGRAM – HYBRID – JW Fields – New Marlboro, MA – CLOSED

New Marlborough, MA New Marlborough, Massachusetts

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.   This Hybrid class as attendees taking the classroom portion online - there is no in person classroom instruction (just a quick review and practice test before the […]

MA Hoisting Continuing Education Course – Multiple Restrictions – Boston College – CLOSED

Chestnut Hill, MA Chestnut Hill, Massachusetts

  You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. Cranes101 curriculum has been approved by the State of Massachusetts and contains the proper […]

Bucket Truck Inspection with Dielectric Testing – T&E Flow Services – Oklahoma City – CALL 508-966-4100 to register

Oklahoma City,, OK Oklahoma City, Oklahoma

  This course offers training on conducting dielectric tests on aerial devices to measure any potential conductivity on insulated components and is best designed for experienced operators and mechanics who are interested in becoming the on-site equipment inspectors for their company. This course is designed to cover the latest revisions of all relevant government and […]

Mobile Crane Nationally Accredited Certification Program – BELLINGHAM OPEN – Call 508-966-4100

Bellingham, MA 57 Mendon Street, Bellingham, MA, United States

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

2A/1B/1C MA Hoisting License Preparation/Continuing Education Course – Bellingham MA – OPEN-Call 508-966-4100

Bellingham, MA 57 Mendon Street, Bellingham, MA, United States

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ […]

Mobile Crane Nationally Accredited Certification Program – National Grid – Buffalo, NY – CLOSED

Buffalo, NY Buffalo, New York

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Mobile Crane Nationally Accredited Certification Program – National Grid – Buffalo, NY – CLOSED

Buffalo, NY Buffalo, New York

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

MA 4B Drill Rig/RI Drill Rig – NE Boring – NH – CLOSED

Derry, NH Derry, NH

  This course covers both the operator regulations under 520 CMR 6.00 for MA and Rule 14 for RI.  Material covered in this course: Massachusetts/RI Regulations Proper equipment setup  Jobsite safety  Component recognition  Introduction to Hydraulic Theory  Inspection Parameters  Trench Safety  Dig Safe Parameters Use this form below to request more information. One of our […]

Tentative (if testing is held week of Jan 6) 2A/1B/1C MA Hoisting License Preparation/Continuing Education Course – Bellingham MA – OPEN

Bellingham, MA 57 Mendon Street, Bellingham, MA, United States

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ […]

Mobile Crane Nationally Accredited Certification Program – Vermont Electric – CLOSED

Rutland, VT Rutland, Vermont

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Signal Person with Basic Rigger Training – Vermont Electric – CLOSED

Rutland, VT Rutland, Vermont

This live signalperson/basic rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in […]

Mobile Crane Nationally Accredited Certification Program – National Grid – Liverpool NY – CLOSED

Liverpool, NY Liverpool, New York

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Signal Person with Basic Rigger Training – Vermont Electric – CLOSED

Rutland, VT Rutland, Vermont

This live signalperson/basic rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in […]

Tentative – if testing is held week of Jan 13 – 2A/1B/1C MA Hoisting License Preparation/Continuing Education Course – Bellingham MA – OPEN

Bellingham, MA 57 Mendon Street, Bellingham, MA, United States

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ […]

Signal Person with Basic Rigger Training – United Civil – Danvers – CLOSED

Danvers, MA

This live signalperson/basic rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in […]

Mobile Crane Nationally Accredited Certification Program – National Grid – Liverpool, NY – CLOSED

Liverpool, NY Liverpool, New York

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending […]

Signal Person with Basic Rigger Training – United Civil – CLOSED

Danvers, MA

This live signalperson/basic rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in […]

Scroll to Top